Friday, October 24, 2014

Arduino Rework Station

 
 
 
 Code and schematics available to anyone that's interested.

60 comments:

  1. This comment has been removed by a blog administrator.

    ReplyDelete
  2. Well, this article is about rework station. If you need any additional info regarding the cells just leave a comment. Thank you!

    ReplyDelete
  3. This comment has been removed by the author.

    ReplyDelete
  4. Hi Jimakos Sn,

    Thank you for sharing your Project

    I am very interested at your Project. Can you give me the sketch code and the schematic please

    ReplyDelete
    Replies
    1. Original code from Norcal Reballer, but i have change a lot of stuff.
      https://www.dropbox.com/s/km43re4lyer7n3v/Arduino%20Rework%20Station.rar?dl=0

      Delete
  5. Dear Jimakos I would like to build this Rework Station, but can not find the schematic and panel drawings! I would like to max6675 is more difficult Cod!
    Lelehet spend somewhere?
    Thanks in advance.
    Üdv.imi535

    ReplyDelete
  6. This comment has been removed by the author.

    ReplyDelete
  7. This comment has been removed by the author.

    ReplyDelete
  8. This comment has been removed by the author.

    ReplyDelete
  9. hello, can you share your scheme? thank you in advance , rufimr111@gmail.com

    ReplyDelete
  10. Dimitrios Karapatis, help me please. I Have stantion, but i dont have MAX31855K. in our city i can find only MAX6675. Can you help me to edit sketch ?

    ReplyDelete
  11. Dimitrios Karapatis, help me please, circuit diagrams, please moura232@gmail.com

    ReplyDelete
  12. please can you send your wiring schematic i got all the parts just need to know how to hook it up thank email me drunkencat129@Gmail.com

    ReplyDelete
  13. Hello good project...please send me circuit diagram and source code teslaomar82@gmail.com
    thank's ;)

    ReplyDelete
  14. Hello
    I buid the controller using Max31755 and MAX6675 and in two options i have the same problem: VP1 and VP2 frezze.
    Please send me a correct code and library and PID values.

    Tanhs in advance

    mtelesfernandes59@gmail.com

    ReplyDelete
  15. Hello,
    very good project
    May I ask for a little help
    I can not adjust the PID control the temperature rises very (20 C) above the set
    He had fineness setting
    thank you very much

    ReplyDelete
  16. This comment has been removed by the author.

    ReplyDelete
  17. Hello,
    Very good Project, you could send me Schematic of Connections, thank you
    Josejavier400@gmail.com
    regards

    ReplyDelete
  18. Hello, very nice project, i want to build it, i will appreciate if you send me the schematics and code please, sorry for my bad english, is not my native language, my mail is crkbqt@gmail.com, thank you in advance.

    ReplyDelete
    Replies
    1. https://www.dropbox.com/s/km43re4lyer7n3v/Arduino%20Rework%20Station.rar?dl=0

      Delete
  19. This comment has been removed by the author.

    ReplyDelete
  20. This comment has been removed by the author.

    ReplyDelete
  21. hello Dimitrios Karapatis
    i found you on https://www.instructables.com/id/Arduino-Rework-Station/#step5
    you have done great project. i would like to do it too, but im not soo good to make it without schematic. coud you please send me it to saviciunas.o@gmail.com
    thanks.

    ReplyDelete
  22. Great job
    Do you have any connection diagram? My email: seba985@o2.pl

    ReplyDelete
  23. hello can you send me Code and schematics at mourad.zemmiri@gmail.com
    Thanks you

    ReplyDelete
  24. Hello please could you also send me the code and schematics to guylevansuk@gmail.com

    ReplyDelete
  25. Cool project. Can i get code and schematics please. I just bought old Weller WQB2000 rework station but hot air an (other blue box) is missing. So i can use many parts of that weller to build my own rework station

    ReplyDelete
  26. Hey buddy! How are you? I want to make it. Can you send me schematics? Brunorivera6@gmail.com thanks!

    ReplyDelete
  27. Hi Jim.I really liked your project.is it possible to send me code ,schematics and menus for it?
    Best regards
    Kostas (drk2276@gmail.com )

    ReplyDelete
  28. Hi, you can send me schematic ? zinyx86@gmail.com

    ReplyDelete
  29. Help me please ans give a Nice code bat eeprom van change a code un programme.,

    ReplyDelete
  30. Hello,very good project.
    Please send me circuit diagram and source code,thank you.
    My email:ma.jony05@gmail.com

    ReplyDelete
  31. Im bilal and from Afghanistan
    help me please, circuit diagrams, bilal000745@gmail.com

    ReplyDelete
  32. This comment has been removed by the author.

    ReplyDelete
  33. Hola amigo me descargue los archivos de tu link pero no veo el schematics o el esquematico por favor dime como hago para tenerlo gracias un gran saludo

    ReplyDelete
  34. hi please send me all files i want to build one ; thanks; ilie321@yahoo.com

    ReplyDelete
  35. Hello,very good project.
    Please send me circuit diagram, se7sebomb@gmail.com
    and i have aquestion is (can i use Arduino atmega 328 instead of Arduino ATmega2560 board ?)

    ReplyDelete
  36. Please help ,, i need circuit diagram
    thank you.

    ReplyDelete
  37. Hi, you can send me schematic?
    Thank you in advance.
    My email is kacpergawel.8@gmail.com

    ReplyDelete
  38. This comment has been removed by the author.

    ReplyDelete
  39. Hi, great project, i'd like to build the same rework station. Can you send me the schematics and the actual arduino program. Many thanks: Denes (depataki@gmail.com)

    ReplyDelete
  40. Hi
    Please send me schematic & surce code
    Thank you
    Hoseyn1258@gmail.com

    ReplyDelete
  41. Αγαπητέ Δημήτρη Χρόνια Πολλά.
    I was try to build this project but i couldn't find a way to display the sensor temperatures real time. In the video we see that the lcd shows real time temperatures but mine is not. I 'm using 6675 instead but both they are working fine in the library example sketch.
    Here is the code i'm try to use: https://pastebin.com/GmvW0SFQ
    Is it possible to send me the correct code for max6675?

    ReplyDelete
  42. Hi, you can send to me schematic omid.heydari.mail@gmail.com

    ReplyDelete
  43. Good day... Can you send me diagram? I want to build your rework station. Thank you. theresajaringa@gmail.com

    ReplyDelete
  44. This comment has been removed by the author.

    ReplyDelete
  45. Hi, you can send to me schematic robert.molina3@gmail.com

    ReplyDelete
  46. Dimitrios! Your project of a self-made station gave an incentive to many people! We have changed and corrected your code a lot, and now the code is developing in several directions. I invite everyone to the forum to discuss and further develop the updated project. https://clck.ru/JNqKg
    https://clck.ru/SCNst (Ваш проект самодельной станции дал стимул многим людям! Ваш код мы сильно изменили и исправили, теперь код развивается по нескольким направлениям. Приглашаю всех желающих в форум для обсуждения и дальнейшего развития обновленного проекта. https://clck.ru/JNqKg
    https://clck.ru/SCNst)

    ReplyDelete
  47. Dimitrios! Your DIY infrared soldering station project has inspired many! We changed and corrected your code a lot, and now the code is evolving in several directions. I invite everyone to the forum to discuss and further develop the updated project.
    (https://clck.ru/JNqKg)
    (https://clck.ru/SCNst)

    ReplyDelete
  48. Hello Dimitrios.I'm Tarik from Turkey.Your project is very interesting and i would like to build one for my myself.Can you share schematic please?Thank you.tariknergis@gmail.com

    ReplyDelete
    Replies
    1. Tarik, I suggest you choose any of the updated management options: http://forum.amperka.ru/threads/%D0%98%D0%9A-%D0%BF%D0%B0%D1%8F%D0%BB%D1%8C%D0%BD%D0%B0%D1%8F-%D1%81%D1%82%D0%B0%D0%BD%D1%86%D0%B8%D1%8F-%D0%BD%D0%B0-arduino-mega-2560-%D0%94%D0%BE%D1%80%D0%B0%D0%B1%D0%BE%D1%82%D0%BA%D0%B0-%D1%81%D0%BA%D0%B5%D1%82%D1%87%D0%B0-ars_v2_lilium_jsn.10176/page-123#post-217570

      Delete